Home :: Relay and IO Modules :: Raise/Lower to Analogue Module

Raise/Lower to Analogue Module

Raise/Lower to Analogue Module
SKU
SKU378
Weight
0.50 Kgs
Our price:
£216.00 (249.50)
including VAT 20.00 % ( £36.00 )
Qty

The AUD converts a floating point signal into a linear analogue output. There are Two inputs on the AUD, one to increase the analogue output and one to decrease the analogue output.
The output of the AUD is stable when the inputs are both off.
A contact closure or voltage signal to either input will cause the output of the AUD to begin to ramp either up or down depending on which input was activated. If both inputs are "ON" the output will reset to the lowest valve of the selected range. 

Features

Field Selectable Rate of Charge.
Field Adjustable Output with Manual Override Potentiometer.
255 Step Resolution.
Current or Voltage Output.
LED Status Indicators.
No Wrap Around.
Relay, Transistor or Triac Input.

: *
: *
: *
Type the characters you see in the picture:


*
The code is case-sensitive and must be entered exactly as above.
Single Point Duct Air Velocity Sensor 0...4 m/s - 0...10Vdc output
£132.00
250mm Air Flow Probe
£57.60
Z-Wave Clamp Power Meter
£138.00
Multi-point Velocity Probe - 1750mm
£264.00
15mm 3 port valve Kvs 4
£106.80
Single Stage Controller -5 to +95
£96.00
Electronic Room Thermostat - 230V on/off heat or cool
£54.00
Dual Phase Cut Module 30VA per channel
£134.40
Phase Cut Amplifier 60VA
£129.60

Product rating

You have rated this product already

Customer Reviews

There have been no reviews for this product.

Add your review here

: *
: *
Type the characters you see in the picture:


*
The code is case-sensitive and must be entered exactly as above.